| Customization: | Available |
|---|---|
| Condition: | New |
| Certification: | CE |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Vacuum mixer is used for mixing and vibrating investment materials and molded
materials. As the mixing process is done in a vacuum state, the work piece is free
of bubbles, and firmness and compactness of the mold has also been improved.
Specification
|
Voltage |
AC220V±10% |
|
Power |
150W |
|
Bowl Capacity |
500ml |
|
Gross Weight |
27kg |
|
Dimensions |
43x43x59cm |
Method of Installation
Our vacuum Mixer is a table type machine; it will work normally combined with the
air compressor. Unpack the package, then check if all the accessories are inside.
Connect the machine to a power supply. Then the machine can be operated following
the instruction.
Instruction
1.Put oil into the vacuum pump(up to the line). Make sure the oil is within 5mm up
or down the oil line while using.
2.Connect the power wire of the oil pump with the mixing machine.
3.Plug in the machine.
4.Stir the material inside the vacuum bowl to pasty state.
5.Screw up the air outlet bolt. Switch on the machine and preset the Mixing time.
Press the Vacuum Pump button. Connect the vacuum bowl closely with the machine
and then press Mixing.
6.After finishing the mixing, switch off the machine.
7.Use the lower black part to vibrate.
Negative pressure dental vacuum mixer
){kind=link}